Epoxy Flooring in Yuma, AZ

Yuma is our home base, and epoxy flooring in Yuma covers more kinds of slabs than any other town we serve. In one week we might coat a garage for a Marine family near the air station, a winter visitor's carport, a patio off a ranch home and a concrete floor in a produce or equipment building. Every one of them sits in the same climate. Wikipedia calls Yuma the driest, sunniest and least humid populated place in the contiguous United States, with 175 days a year at 90°F or higher.

A city of about 100,000 with very different households

The 2020 census counted 95,548 people in Yuma and 41,496 housing units, and the Census Bureau's 2023 estimate passed 100,000. The households behind those numbers vary a lot, and so do the floors. We sort most Yuma jobs into four groups:

• Military households. Marine Corps Air Station Yuma was the metro area's largest employer in 2018, with 5,568 workers, and the Army's Yuma Proving Ground had 2,382. Families who own here often want a floor done between moves or before renting the house out.
• Winter residents. Between 70,000 and more than 85,000 out-of-state visitors spend the winter in Yuma. Many want the job finished before they arrive or after they head north.
• Farm and packing businesses. Yuma grows more than 175 crops, and lettuce leads them. Shops, equipment buildings and break rooms take a heavier floor.
• Year-round families. About 26% of residents are under 18. Garages here become gyms, play areas and overflow storage.

Rain is rare, but moisture still matters

Yuma averages about 3.36 inches of rain a year. June is usually the driest month. Humidity stays low most of the time, with one exception. Wikipedia notes that "Gulf surges" tied to the summer monsoon or tropical storms can push humidity up for a few days. In 1997 the remnants of Hurricane Nora dropped 3.59 inches of rain at MCAS Yuma in one storm. That is more than a typical full year. A dry climate does not guarantee a dry slab. Irrigated yards, sprinkler lines along a garage wall and low spots that hold runoff can all keep moisture under the concrete. We test for it before we choose a primer, because moisture pushing up from below is a common reason coatings blister.

Heat sets the install schedule

The all-time record high in Yuma is 124°F, set in 1995. On summer jobs the slab can already be warm at sunrise, and it only gets hotter. Resin cures faster as the temperature rises. So from late spring into fall we: 1. Start at first light and plan to have the coats down by late morning. 2. Check the slab surface temperature before each coat. 3. Mix smaller batches so nothing begins to set in the bucket. 4. Close the garage door or shade the opening where we can.

October through April gives us much more working time. That is also when winter residents are in town, so those months fill up first.

Get a Free Estimate

Which systems fit Yuma floors

• Garage floor coating with a UV-stable topcoat is our most common job. Garage doors here stay open a lot.
• Polyaspartic floor coating suits owners who need the space back quickly, such as a family between military moves.
• Epoxy flake floors hide the fine desert dust that collects in every garage between sweeps.
• Patio and pool deck coatings use lighter colors and texture for slabs that sit in full sun.
• Metallic epoxy floors work in interior rooms, offices and dealerships that stay air-conditioned.
• Shop and commercial floor epoxy goes into agricultural buildings, service bays and warehouses that see forklifts, tractors and chemical spills.

Older Yuma versus newer Yuma

Yuma became the county seat in 1871 and incorporated as a city in 1914, so parts of town near the river and downtown are much older than the subdivisions to the south and east. Older slabs often have paint, patched cracks or a worn surface. Newer slabs tend to be smooth and hard, and a coating will not grip them until they are ground. We diamond grind both types. The difference is how much repair comes first.

What to expect on an estimate

We measure the floor, check moisture and look at cracks, stains and any old coating. We also ask how you use the space and which direction the door faces. Then you get a written quote that names the system and each step. Call (928) 569-8241 to set a time.

Dust, sand and cleaning

The Algodones Dunes are close to Yuma, and fine sand reaches every garage in town. On bare concrete it grinds in and turns the floor gray. On a sealed floor it sits on top. A dry dust mop handles most weeks. For a deeper clean, use warm water and a mild cleaner, then let the floor dry. Skip harsh acids and citrus degreasers, because they can dull a topcoat over time. Mats at the house door catch grit before it spreads indoors.

Carports, casitas and RV pads

Not every Yuma home has a closed garage. Many have a carport, a covered patio, a detached casita or a concrete RV pad. Those slabs take the same systems. They get more sun and blowing sand than an enclosed garage, so we lean on texture and a UV-stable topcoat for them. A casita or converted garage that is air-conditioned can take a solid color or metallic finish instead.